AIM MXK10-Gen4 Plug & Play Dash Logger Kit Kawasaki Ninja ZX10 2011-2015

The AIM MXK10 is a dash logger equipped with a large compact 5 inch TFT high contrast display, natural heir of the MXS model, designed to acquire and display data from the electronic control unit for motorcycles and cars. Equipped with a fully integrated high-precision accelerometer and gyroscope, a GPS module is also included in the kit. The MXK10 is expandable with 8 additional modules (Available separately)
 
Fully configurable pages
The information is easily accessible thanks to the use of page technology, it is possible to create and scroll through the appropriate buttons.
Large high contrast display
The large TFT color display with high contrast allows an always impeccable reading of data and information, the display is also equipped with a light sensor that adjusts the brightness according to the ambient light, making data consultation always clear and immediate in any light condition.
Configurable alarm signals
It is possible to configure 6 alarm signals by deciding the switching priority, the color, and also the flashing, defining the frequency or leaving the light on steady. It is also possible to associate a message to be displayed on the display corresponding to the relative light. The 6 RGB LEDs are individually configurable by the user, giving the possibility to decide color and mode for each gear change.
Expandability at the highest level
MXK10 has two digital outputs, manageable separately. They can be used independently on analogue, digital or CAN inputs. It is possible through these to manage external systems, such as activating or deactivating cooling fans or circulation pumps depending on the occurrence or utility. The MXK10 allows the sending of messages to a CAN line allowing the expansion of the vehicle's control range. Equipped with 2 analogue inputs for mounting special cameras so as to be able to transform the large display into a functional rear view camera. 
Through the CAN bus, the MXK10 is expandable with 8 additional modules to maximize your driving experience and adapt to new needs that have arisen:
GPS08 Module
Thanks to this module it is possible through the interface of the supplied software Race studio 3 to download and analyze the lap data to intervene on the engine set-up while improving one's driving technique.
Channel Expansion
Allows you to add 4 analogue 0-5 Volt channels.
TC Hub
Allows you to add 4 K thermocouples.
LCU-One CAN
LCU Wide band lambda controller, equipped with a probe: transmits all information on the Air/Gasoline ratio, lambda probe value and exhaust gas temperature allowing engine tuning.
SmartyCam HD cameras
The on-board cameras that read the data from the system and automatically superimpose them on the video for an even more precise reading.
Memory Module
It is a support for SD cards useful for recording data from the AIM logger during track sessions.
Race Studio 3,  the perfect software for your AIM
With the Race studio 3 it is possible:
Create, modify, delete, import and export configurations with all channels, the drivers of the control unit, the mathematical channels, the display pages, the digital outputs, the alarms, the shift lights and all the desired expansions. It is also possible to manage the maps of all your favorite circuits and compare two laps on the same track by watching the videos recorded by the SmartyCam HD and GP HD cameras.
 
Features: 
Compact TFT 5 "high contrast display (1.100 lumens), 6 configurable RGB LED alarms, 10 configurable RGB LED shift lights, 2 Motorsport connectors + 1 Binder connector, 3 CAN connections, connection to more than 1,000 ECU market protocols, inertial platform, 8 configurable analogue channels, 4 digital speed channels, 1 RPM channel, 2 digital outputs, fully configurable mathematical channels, Wi-Fi 802.11 connection, IP65
Display: 5” TFT
Resolution: 800x480 pixels
Contrast: 600:1
Brightness: 700cd/m2 - 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 6 RGB freely configurable
Shift lights: 10 integrated freely configurable RGB LEDs
CAN connections: 3
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, Thermocouple Expansions, LambdaController, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 4 Speed inputs, lap signal, coil RPM input
Digital outputs: 2 (1 A max each)
Second CAN: Yes
Wi-Fi connection: Yes
Accelerometer: Internal Three-axial ± 5G + Three-axial Gyroscope
Internal memory: 4 GB
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 Motorsport connectors + 1 Binder connector
Power consumption: 400 mA
Dimensions: 169.4x97x23 mm
Weight: 530 g
Waterproof: IP65
 
The kit includes:
MXK10, GPS module with cable, USB cable, standard 37-pin wiring, Race Studio 3 software.